5-3-7 Terminal Emulations
You can issue commands and receive response by clicking the Terminal button on the tool bar. There
are two kinds of command format supported by this emulating function. Users can choose ASCII or
Hexadecimal mode as their communication base. If the ASCII mode has been selected, the Windows
Utility will translate the request and response string both in Modbus and ASCII format. Please refer
Chapter 6-2 to use Modbus Command; and refer Chapter 6-4 to apply ASCII command.
For example, select ASCII mode and key-in the ASCII command “$01M” (read module name), then click
Send. The response will show as figure 5-24.
Figure 5-24 Command Emulation
To Next Page
Loading...
