Advantek Networks ALN-318C User Manual

3
1. Introduction
Gigabit PCI Adapter Installation CD is an All-In-One installation utility for Gigabit PCI
Adapter. It automatically detects and installs recently installed Gigabit PCI Adapter hardware
under Windows 98SE, ME, 2000, and XP. This utility includes Install Driver and User Manual
two sections. Click Install Driver to start Gigabit PCI Adapter driver installation process. User
Manual includes specification and hardware/software driver installation instructions for Gigabit
PCI adapter.
1.1 System Requirements
z Pentium compatible processor 200 MHz and above
z 32 MB system memory or more
z 30 MB free space on your hard drive
z CD-ROM drive
z One available PCI slot
z Microsoft Windows NT4.0, Windows 98/98SE, Windows ME, Windows 2000,
Windows XP, DOS, Linux, and Netware x.
1.2 Package Contents
z One Gigabit PCI Adapter
z Gigabit PCI Adapter Installation CD disk
If any of above items is missing or damaged, please contact your local dealer immediately.

Advantek Networks ALN-318C Specifications

General

Full duplex	Yes
Maximum data transfer rate	1000 Mbit/s
Dimensions (WxDxH)	120 x 16 x 28 mm
Compliance industry standards	IEEE 802.3, IEEE 802.3u., IEEE 802.3ab 1000BaseT, IEEE 802.3x Full Duplex Flow Control
Supported data transfer rates	10/100/1000
Connectivity technology	Wired
Compatible operating systems	Windows 95, 98, 98SE, ME, 2000, XP, Linux, NT3.x, NT4.x, NetWare3.x, NetWare4.x, NetWare5.x
Storage temperature (T-T)	-55 - 125 °C
Operating temperature (T-T)	0 - 70 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	50 g