Infrastructure and Ad-Hoc
With both Infrastructure and Ad-Hoc types, the properties should look like the
picture above. Six property pages present different information of current wireless
network status.Please read the following explanations before you reviewing these
pages, it could help you to well understand the wireless environment around the
system. It is easy to use to switch property pages just by clicking left button of mouse
on the title of each page. The following six sections describe detailed information of
each page.
5.2 General Page
This page represents the general information of this adapter.
1. Status : The status of station connection to AP.
2. Speed : Current transition speed in Mbps (Mega-Bits-Per-Second).
3. Type : Current wireless LAN configuration type.
4. Encryption : Current encryption mode used.
5. SSID : Name of wireless network.
6. Signal Strength :
The average signal quality of packets received from wireless network.
We recommend connecting AP with over 70% signal strength.
7. Throughput Diagram :
Current throughput, including transmission (Tx) and total traffic (Total).
To Next Page
Loading...
Need help?
General
