Point and Click
When you have moved and placed the cursor over an icon, a menu item or a command that you want to
execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as
point and click is the basics of operating your notebook. Unlike the traditional pointing device such as
the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is
equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is to execute a
double-click.
Drag and Drop
You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on
the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the
touchpad on the second tap. Now, you can drag the selected item to the desired location by moving
your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place.
Alternately, you can press and hold the left button when you select an item, and then move your finger to
the desired location; finally, release the left button to finish the drag-and-drop operation.
1. Move the cursor by sliding your
fingertip.
2. Put your wrist on the desk comfortably.
About Hard Disk Drive
Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much
higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage
device. Therefore, it is usually used to install the operating system and software applications.
To avoid unexpected data loss in your system, please backup your critical files regularly.
Do not turn off the notebook when the hard disk In-use LED is on.
Do not remove or install the hard disk drive when the notebook is turned on. The replacement of hard disk
drive should be done by an authorized retailer or service representative.
To Next Page
Loading...
Need help?
General
