Connecting the External Display Devices
This notebook provides a VGA port for connecting a larger display with higher resolution.
The 15-pin-D-sub VGA port allows users to connect an external monitor or other standard VGA-compatible
device (such as a projector) for a great view of the notebook display.
To connect the external display, make sure the notebook and the external display are both powered off, and
then connect the display to the notebook.
Once the display is connected to the notebook, power on the notebook and the external display should
respond by default. If not, you can switch the display mode by pressing [Fn]+[F2]. Alternately, you can
change the display mode by configuring the settings in Display Properties of Windows operating system.
Connecting the Communication Devices
Using the LAN
The RJ-45 connector of the notebook allows you to connect the LAN (local area network) devices, such as a
To Next Page
Loading...
Need help?
General
