10
Hints and Tips
1. Make sure the Nano Dongle is plugged into a USB port and the
computer is on or try the Nano Dongle in a dierent USB port.
2. Check battery installation. Replace battery if needed.
3. Move the keyboard closer to the Nano Dongle.
4. Ensure your computer’s operating system supports wireless input
devices (e.g. mice and keyboards), and is the latest version.
Mouse not working:
1. Check that the power switch is in the on position.
2. If mouse performance is slow or intermittent around a wireless network,
unplug the Nano Dongle from the USB port and then reinsert it. To
reactivate the mouse, switch it on, o and on again using the ON/OFF
switch on the bottom of the mouse.
3. If the mouse is moving erratically, change the working surface which
the mouse is operating on.
To Next Page
Loading...
Need help?
General
