8
* Function control is available on the unit and the Remote Control.
** Function not available in this model.
*** FLO TV function only available when optional FLO TV module is installed.
Note: Refer to Appendix A FLO TV for FLO TV operating instructions..
1. POWER Button*
Press this button to turn the unit ON and OFF.
2. MONITOR SELECT Button
M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.
M2 Button** – Sets the remote control code to allow control of the unit set to M2 mode.
3. FLO TV Button ***
4. DVD Mode Select Button
Press this button when playing DVDs. Switches certain function keys on the remote control for DVD functions.
5. SOURCE Button*
Each time the button is pressed, the unit will select various sources in the following sequence:(DVD/USB, AV1/FLO TV, AUX and GAME).
6. FMM ON/OFF Button
Turns the FM Modulator on/off.
7. FMM SELECT Button*
Select the wireless FM Modulator Frequency:
(CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9
89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz).
Press this button to access the FLO TV mode. Also switches the function keys on the remote control to correspond to FLO TV functions.
To Next Page
Loading...
Need help?
General
