FLO TV Operation
You can operate the FLO TV module with the wireless remote control.
When FLO TV is powered on, the FLO TV logo screen will be displayed until
the receiver tunes to a channel. This may take up to 30 seconds after the
vehicle and overhead turned on.
Upon power up, the FLO TV service will default back to the last viewed
channel. If the screen does not appear press the Mode key on the
remote control to switch back to FLO TV.
Are You Subscribed?
If you are not subscribed to FLO TV a Preview Channel will be
displayed. Changing to another channel will display a screen similar to
the adjacent one. (Note: Screen background in this example has
diagonal bars in it)
Some channels may not be available for viewing if they are not included
in the FLO TV service package you are subscribed to.
32
To Next Page
Loading...
