19
b).Select ‘OSD Lang’ using the UP/DOWN button, and then press the
RIGHT button to enter the submenu. Choose the desired OSD lan-
guage using the UP/DOWN button and then press ENTER to confirm
the setting. Press the LEFT button to return.
OSD Lang Screen Display
c).Select ‘Angle Mark’ using the UP/DOWN buttton, and then press the
RIGHT button to enter the submenu. Choose Angle Mark on or off
using the UP/DOWN button and then press ENTER to confirm the
setting. Press the LEFT button to return.
Angle Mark Screen Display
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
NOTE: Not all discs contain above features. The above features are
disc dependent.
To Next Page
Loading...
Need help?
General
