To Next Page
I
iwilliamsAug 1, 2025
What does “Er 3” mean on Advocate Blood Pressure Monitor?
- LLisa JonesAug 1, 2025
If the LCD of your Advocate Blood Pressure Monitor shows “Er 3”, it means that the measured result appears wrong. You should measure again.
What does “Er 3” mean on Advocate Blood Pressure Monitor?
If the LCD of your Advocate Blood Pressure Monitor shows “Er 3”, it means that the measured result appears wrong. You should measure again.
What to do if Advocate SPBP-04 LCD shows “ErU”?
If the LCD of your Advocate Blood Pressure Monitor displays “ErU”, it indicates insufficient inflation. Wait for 5 minutes and re-measure. If operation is still abnormal, contact manufacturer or agent.
What does “Er 2” mean on Advocate Blood Pressure Monitor?
If the LCD of your Advocate Blood Pressure Monitor shows “Er 2”, it indicates radiation interference. Move away from the radiation source.
Why Advocate Blood Pressure Monitor readings are too high or too low?
If your Advocate Blood Pressure Monitor isn't measuring correctly or the readings seem too high or low, several factors could be at play. First, ensure the cuff is correctly wrapped around your arm and try again. An unstable pressure system might be the culprit, so remain calm, still, and silent during the measurement. Also, confirm the cuff is level with your heart while you're sitting comfortably.
What to do if irregular heartbeat symbol appears on Advocate SPBP-04?
If you see an irregular heartbeat symbol on your Advocate Blood Pressure Monitor, it could indicate an irregular heartbeat. Relax for about 5 minutes and measure again. If it appears again, it is recommended to consult your physician or another health care professional.
General| Brand | Advocate |
|---|---|
| Model | SPBP-04 |
| Category | Blood Pressure Monitor |
| Language | English |
Guidance on correct posture for accurate blood pressure measurements.
