17
TECHNICAL SPECIFICATIONS
Keyer speed range: 1 to 99 WPM
CMOS Memory: 4096 bits (approximately 500 Morse characters)
Keying output: Grid block –300 V, max. 30 mA
max. Cathode/Transistor 300 V, max. 200 mA
Serial number range: 01 to 9,999
Auto Repeat Delay range: approximately 1 second to 2 minutes
Dot memory On/Off: program selectable
Dash memory On/Off: program selectable
Dot-space ratio: 0.5 to 1.5
Dash-space ratio: 2.0 to 4.0
Semiautomatic (bug) mode: program selectable
Memory keep-alive: holder provided for two size AA batteries for up to 12 months
of memory retention. Batteries are automatically switched on
only upon removal of external 13 volt source.
Power required: 10 – 15 VDC at 200 mA
Weight: 1 lb. 12 oz.
Dimensions: 6.6" deep × 7.3" wide × 2.75" high
To Previous Page
Loading...