How to fix an AEG Electrolux LAVATHERM 55540 that does not work?
If your AEG Electrolux Dryer isn't working, first, ensure the mains plug is properly inserted into the socket and the fuse is working correctly. Next, check if the loading door is fully closed. Finally, press the START PAUSE button to initiate the drying cycle.
What to do if the AEG Electrolux Dryer programme is inactive and the water tank warning is on?
If the programme on your AEG Electrolux Dryer is inactive and the empty water tank warning LED is lit, the condensate tank is likely full. Empty the condensate tank, then start the programme again by pressing the START PAUSE button.
Why is the LED lighting in yellow above the START PAUSE button on my AEG Electrolux Dryer?
If the LED above the START PAUSE button on your AEG Electrolux Dryer lights up yellow temporarily when a button is pressed, it indicates washing protection. Since the option can no longer be set after the programme has started, turn the programme knob to OFF. Then, set the programme again.
Why are the drying results unsatisfactory with my AEG Electrolux LAVATHERM 55540?
If you're not satisfied with the drying results from your AEG Electrolux Dryer, consider these potential causes: * The wrong programme may have been selected. Try a different programme. * Lint filters, fluff filter, or the heat exchanger might be clogged. Clean these components. * The laundry load might be too large. Reduce the load size. * Ventilation slots may be covered. Uncover them to ensure proper airflow. * Residue may be present on the drum's interior. Clean the inside surface of the drum and drum ribs. * The water conductance at your location may differ from the machine's standard setting. Re-programme the standard setting for the degree of drying.
Why does the drying cycle last so long on my AEG Electrolux LAVATHERM 55540 Dryer?
If your AEG Electrolux Dryer's drying cycle is taking longer than usual, check the following: * The lint filter and fluff filter might be clogged. Clean them. * The DELICATE button may be pressed, or the load volume might be too large. Reduce the load volume. * The laundry may not have been spun sufficiently. Ensure laundry is adequately spun. * The room temperature may be particularly high. This is an automatic process, and there is no fault with the appliance. Lowering the room temperature, if possible, may help.
Why does the drying cycle end too quickly on my AEG Electrolux LAVATHERM 55540 Dryer?
If the drying cycle on your AEG Electrolux Dryer ends shortly after the programme starts, it could be due to not enough washing being loaded, or the washing is too dry for the selected programme. To resolve this, select a time programme or a higher drying level, such as EXTRA DRY instead of CUPBOARD DRY.
General| Brand | AEG Electrolux |
|---|---|
| Model | LAVATHERM 55540 |
| Category | Dryer |
| Language | English |
Crucial safety advice and warnings for correct and safe operation of the appliance.
Identifies and labels the main components and parts of the condenser dryer.
Details the buttons, knobs, and indicator lights on the dryer's control interface.
Lists all available drying programmes with their load capacity, functions, and uses.
Comprehensive guide to operating the dryer for everyday laundry cycles.
Guidelines for maintaining the dryer's performance and longevity through cleaning.
Detailed instructions for cleaning all lint filters to maintain dryer efficiency.
Procedure for draining the collected water from the condensate tank.
Instructions for cleaning the heat exchanger to prevent damage and ensure efficiency.
Guide to resolving common dryer issues using error indicators and troubleshooting tables.
Guide to resolving common dryer issues using error indicators and troubleshooting tables.
Information on obtaining technical support and what details to provide.
To Next Page
