Operating Instructions
34
Unlocking the Door in an Emergency
If the door cannot be opened (e.g. due to a faulty door lock or due to a
power cut during the washing program), it can be opened using the
emergency unlock feature.
0 1. If water can be seen in the window of the door first carry out an emer-
gency emptying (see section "Carrying out an emergency emptying").
2. Turn the knob anti-clockwise with the
help of a coin or a screwdriver.
3. Open the door by pulling on the door
handle.
Additional Rinse and/or Wash-Water Cooling
The washing machine is on a very economical water consumption set-
ting.
• For people who suffer from an allergy to detergents, it it may be
helpful to rinse with extra water (additional rinse).
• The wash-water can be cooled down before being pumped out at the
end of the main wash (by adding cold water). This reduces thermal
shock to fabrics, helping to prevent creasing.
3
The program duration and water consumption are increased by wash-
water cooling and/or the additional rinse.
Additional Rinse (RINSE+)
3
If this function is set an additional rinse is performed for the
programs COTTONS/LINEN, EASY-CARES and DELICATES.
As supplied from the factory, the additional rinse function is not
set.
Setting the Additional Rinse Function:
0 1. Turn the program selector to SHORT SPIN.
2. Press the SOAKING button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, RINSE
+ flashes
on the program progress display for 5 seconds.
3. Whilst RINSE
+ is flashing, release the SOAKING button.
The additional rinse function is set once the flashing has ceased. It con-
tinues to be set until specifically disabled.
Knob
To Next Page
Loading...
