Operating Instructions
36
Switching off Wash-Water Cooling:
0 1. Turn the program selector to SHORT SPIN.
2. Press the PRE WASH button for at least 5 seconds.
As soon as the button is pressed MAINWASH flashes on the program
progress display. After 5 seconds MAINWASH ceases to flash and illumi-
nates continuously for 5 seconds.
3. Whilst MAINWASH is continuously illuminated, release the PRE WASH
button.
Once MAINWASH has ceased to illuminate, the wash-water cooling
function is disabled.
Additional Rinse and Wash-Water Cooling
The additional rinse and wash-water cooling functions can be com-
bined. Set as described in “Additional rinse” and “Wash-water cooling”.
To Next Page
Loading...
