Do you have a question about the AEG AGN2400B and is the answer not in the manual?
Manual contains important instructions for installation and maintenance of generator and batteries.
Explanations and designations for various symbols used in the manual.
Generator is designed for electrical power for appliances, lighting, tools, and motor loads.
Critical safety warnings including carbon monoxide, grounding, and environmental factors.
General instructions and positioning before starting the unit.
Procedure to check and add engine oil, recommended oil type, and precautions.
Procedure to check and add fuel, recommended fuel type, and precautions.
Guidance on using fuel stabilisers and warnings about oxygenated fuels.
Instructions for operating the generator using AC and DC power outputs.
Step-by-step guide for starting the generator's engine, including choke and switch use.
Procedures for stopping the engine under normal and emergency conditions.
Guidelines for keeping the generator clean and dry, and cleaning methods.
Instructions for checking and cleaning the air filter for optimal performance.
Procedure for changing engine oil, including disposal of used oil.
Instructions for cleaning the fuel sediment cup.
Guide for checking, cleaning, and replacing the spark plug.
Information on cleaning exhaust port and muffler, and spark arrestor.
Procedures for draining fuel tank and carburetor.
Guidelines for safely transporting the generator, ensuring it's cool and level.
Recommendations for preparing the generator for storage based on duration.
A table outlining recommended maintenance tasks and intervals.
Lists common issues like engine not starting, lacking power, and receptacle problems with causes and fixes.
Detailed electrical wiring diagram for the AGN2400B model.
Addresses and contact details for various regional service centers and distributors.
| Power Output | 2000W |
|---|---|
| Engine Type | 4-stroke OHV |
| Fuel Type | Gasoline |
| Run Time at 50% Load | 8 hours |
| Outlets | 2 x 230V AC, 1 x 12V DC |