EasyManua.ls Logo

AEG Powertools AGN3800B - User Manual

AEG Powertools AGN3800B
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Original Instructions
AGN3800B
PORTABLE GENERATOR SET
Question and Answer IconNeed help?

Do you have a question about the AEG Powertools AGN3800B and is the answer not in the manual?

Summary

Introduction

Grounding the Generator

Instructions for safely grounding the generator to prevent shock or electrocution.

General Safety Warnings

Essential safety precautions to prevent injury or death from electrocution, fire, or CO poisoning.

Storage and Transport Safety

Guidelines for safe storage and transport, including cooling and fuel handling.

Maintenance and Inspection

Advice on using authorized parts, maintaining the unit, and inspecting for damage.

Specific Safety Rules

Building Wiring Connection

Requirements for connecting the generator to a building's wiring system via a transfer switch.

Carbon Monoxide (CO) Hazard

Warning about deadly CO gas from exhaust and need for ventilation and CO detectors.

Operating Environment and Fueling

Guidance on placement, ventilation, fuel handling, and keeping the unit dry.

Extension Cords and Power Sources

Recommendations for extension cord length and avoiding connection to other power sources.

Symbols

Electrical Symbols

Explanation of symbols for Volts, Amperes, Hertz, Watt, Hours, Gallon, Quart.

Safety and Warning Symbols

Explanation of symbols for Wet Conditions Alert, Read Operator's Manual, Eye Protection, Safety Alert, Electric Shock, Toxic Fumes, Fire/Explosion, Hot Surface, Lifting Hazard, Ground, Electrocution.

Symbols (Signal Words)

Signal Word Meanings

Defines signal words DANGER, WARNING, CAUTION and their associated risk levels.

Service and Safety Recommendations

Emphasizes professional servicing, using identical parts, and reading the manual.

Eye Protection Requirement

Mandates wearing eye protection to prevent severe eye damage from thrown objects.

Safety Labels

Fueling Warnings

Instructions on safe fueling practices, including no smoking and not overfilling.

Engine Oil Warnings

Reminders to add oil before operation and check the level regularly, noting the oil sensor.

Hot Surface Warning

Warning to avoid touching hot engine parts like the muffler and cylinder.

Icon Warnings

Highlights specific icon warnings, such as 'HOT MUFFLER'.

Electrical

Generator Capacity and Load Management

Guide on selecting items and managing loads to avoid overloading the generator and connected devices.

Appliance Wattage Reference

Chart showing typical continuous and surge watts for various appliances to aid in load calculation.

Features

Technical Specifications

Lists key technical specifications like AC/DC output, engine details, and noise levels.

Approvals and Emissions

Details compliance with CE and Euro Emission standards, and noise level measurements.

Product Features Overview

Know Your Generator

Encourages familiarization with operating features and safety rules before use.

Receptacles and DC Terminals

Describes the AC outlets and DC terminals for battery charging, including polarity.

Assembly and Packing List

Information on product assembly, unpacking, and the included items.

Operation

Carbon Monoxide (CO) Danger

Strong warning about the lethal danger of CO gas and the need for outdoor operation and CO alarms.

Grounding and Modification Warnings

Emphasizes proper grounding to prevent electrocution and warns against product modification.

Checking;Adding Oil

Detailed steps for checking and adding engine oil, specifying oil type and level.

Checking;Adding Fuel

Instructions for checking and adding fuel, specifying fuel type and fill level.

Using Fuel Stabiliser

Oxygenated Fuels Warning

Warning against using E85 or ethanol blended fuels due to warranty voidance.

AC Operation

Steps for operating the generator in AC mode, including breaker and appliance connection.

DC Operation and Connecting Batteries

Guide for using DC terminals to charge 12V batteries, including cable connection and safety precautions.

Starting the Engine

Step-by-step instructions for starting the generator engine, including choke and switch usage.

Maintenance

Stopping the Engine

Procedures for stopping the engine under normal and emergency conditions.

General Maintenance

Guidelines for keeping the generator clean, dry, and free from clogging.

Air Filter Maintenance

Instructions for checking, cleaning, and replacing the air filter elements for optimal performance.

Changing Engine Oil

Steps for draining old oil and refilling with new oil, including disposal advice.

Maintenance Procedures

Cleaning Fuel Sediment Cup

Procedure for cleaning the fuel sediment cup to prevent carburetor issues.

Spark Plug Maintenance

Instructions for checking, cleaning, or replacing the spark plug for proper engine function.

Draining Fuel Tank; Carburetor

Steps for draining fuel from the tank and carburetor to prevent gum deposits during storage.

Maintenance Tasks

Storage Guidelines

Recommendations for preparing the generator for storage based on duration, including fuel and oil management.

Maintenance Schedule

A detailed schedule outlining required maintenance tasks and their recommended intervals.

Maintenance Troubleshooting

Troubleshooting Common Problems

Lists common issues like engine not starting or lacking power, with possible causes and solutions.

Emissions Related Symptoms

Identifies symptoms that may indicate problems affecting the unit's emissions levels.

Wiring Diagram - AGN3800 B

Limited Warranty

Warranty Coverage and Limitations

Details warranty terms, coverage exclusions, and limitations of liability.

Geographical Applicability and Declaration

Specifies warranty applicability regions and declaration details.

AEG Powertools AGN3800B Specifications

General IconGeneral
Starting Watts3800 W
Engine Type4-Stroke OHV
Fuel Tank Capacity15 L
Power Output3800W
Rated Power3500W
Fuel TypePetrol
Starting SystemRecoil
Outlet Types2 x 230V

Related product manuals