Rear spacers
Inside the appliance you find two spacers
which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then retighten the screws.
Door reversibility
WARNING!
Before carrying out any operations, remove the plug from the power socket.
To change the opening direction of the door, do these steps:
1. Remove the clip-in ventilation grille
(D). Remove the bottom hinge (E) by un-
screwing the three fixing screws and
keep the hinge gasket (X).
N
F
F
X
E
D
Y
M
Z
Installation
17
To Next Page
Loading...
