What to do if my AEG AX9 does not operate?
If your AEG Air Cleaner isn't working, first, ensure the power plug is securely pushed into the electrical outlet. Also, check your house fuse or circuit breaker. Replace the fuse with a time delay type or reset the circuit breaker if needed.
Why the air quality does not improve with my AEG AX9 Air Cleaner?
If the air quality isn't improving with your AEG Air Cleaner, check if any windows or doors are open. Close all doors, windows, and any other openings that connect the room to the outside.
How to reduce noise from my AEG Air Cleaner?
To reduce noise from your AEG Air Cleaner, make sure there are no obstacles near the appliance. Ensure it has at least 30 cm of free space around it for optimal operation.
What to do if the fan of my AEG AX9 Air Cleaner does not operate?
If the fan on your AEG Air Cleaner isn't working, make sure the air intake door is properly closed and the filter is correctly installed. Then, try using the purifier again.
Why fan speed does not change on my AEG Air Cleaner?
The fan speed on your AEG Air Cleaner will increase or decrease gradually, which is normal. If the speed doesn't change after a long time, please contact an authorized Electrolux servicer for assistance.
Why my AEG AX9 Air Cleaner produces a strange smell?
When you first use your AEG Air Cleaner, you might notice a plastic or paint smell. This is normal and should disappear quickly. If the smell continues or you notice a burning smell, disconnect the purifier and contact an authorized Electrolux servicer.
What to do if the loading LED flashes quickly on my AEG AX9?
If the loading LED flashes quickly during operation of your AEG Air Cleaner, the unit isn't working correctly. Unplug it from the outlet, wait 30 seconds, and plug it back in. If the problem persists, contact an authorized Electrolux servicer for support.
Safety guidelines and warnings for children and individuals with reduced capabilities.
Information on proper disposal of the product and its components.
Instructions for optimal placement and required clearance for the air purifier.
Steps to remove the plastic protective bag from the multi-layer filter before installation.
Explanation of air quality levels indicated by light colors and PM2.5 concentrations.
Guidelines for cleaning the appliance's plastic and fabric components.
Instructions for cleaning the air quality sensor to ensure accurate readings.
Warnings against using harsh cleaners and notes on filter replacement.
General| Type | Air Purifier |
|---|---|
| HEPA Filter | Yes |
| Washable Filter | Pre-filter is washable |
| Air Quality Sensor | Yes, PM2.5 sensor |
| Auto Mode | Yes |
To Next Page
