To Next Page
R
Rachel GordonJul 29, 2025
How to wash filters of AEG AX3?
- GGabriel OrtizJul 29, 2025
For your AEG Air Cleaner, you should replace the compound filter instead of washing it. The pre-filter, however, can be wiped clean.
How to wash filters of AEG AX3?
For your AEG Air Cleaner, you should replace the compound filter instead of washing it. The pre-filter, however, can be wiped clean.
Why is the control panel on my AEG AX3 not working?
If the control panel of your AEG Air Cleaner isn't working, there are a few things to check: * First, ensure the power cord is firmly attached to both the unit and the wall socket. Then, try pressing the ON/OFF icon again. * If that doesn't work, reopen the bottom of the unit, readjust the filter so it's centrally placed, and close the bottom firmly, ensuring it's locked. Then, retry operating the unit. * If the issue persists after these steps, it may indicate a fan motor failure, and the unit won't operate. In this case, contact an AEG authorized servicer for assistance.
What to do if AEG Air Cleaner operates normally but the outgoing air volume is significantly reduced?
If your AEG Air Cleaner is running but the airflow is significantly reduced, consider the following: * Ensure that the equipment installation position has enough space reserved and the outlet is not blocked. * Check the filter replacement indicator status and confirm that filters have been replaced as needed.
Why is my AEG AX3 so noisy?
If your AEG Air Cleaner is making a lot of noise, make sure that: * The equipment is installed on a level surface. * Re-confirm the filter installation position and order.
General| Brand | AEG |
|---|---|
| Model | AX3 |
| Category | Air Cleaner |
| Language | English |
Covers essential electrical warnings, grounding, cord handling, and general safety advice during operation and maintenance.
Instructions on how to properly dispose of the product, indicating it contains batteries and should not be treated as household waste.
Detailed steps for opening the base, removing and installing the filter correctly before operating the air purifier.
Instructions on connecting the power plug and powering the unit on using the ON/OFF icon.
Guidance on adjusting fan speed and switching between Auto and Sleep modes for optimal air purification.
Details on the air quality sensor's function and how different light colors indicate air quality levels.
Information on the filter change reminder and procedures for replacing and resetting the indicator.
Addresses common issues like panel malfunction, noise, and reduced air volume with possible diagnoses and corrective steps.
