12
7.1.6 Call timer
Your handset or base automatically times the duration of each call.
The call timer is displayed as soon as you answer a call or about 15
seconds after dialling, and remains on the screen for a few seconds
after the call has ended. It is shown in hours, minutes and seconds
format (HH:MM:SS).
7.2 Answer a call
Using the handset:
If the handset is not on a charging cradle or the base station:
tWhen the phone rings, press
or to answer the call.
If the handset is on a charging cradle or the base station and if “AUTO
ANSWER“ is set to “ON“:
tWhen the phone rings, lifting the handset off the base or charger will
answer the call automatically, without having to press any buttons.
Using the base:
When the phone rings, press
to answer the call.
7.3 End a call
Using the handset:
tDuring a call press
to end the call.
OR
tPut the handset on the base station or charger to end the call.
7.4 Handset speakerphone
During a call on the handset, you can press
to alternate between
hands-free speakerphone and normal handset use.
7.5 Adjust earpiece and handsfree volume
There are 5 levels (“VOLUME 1” to “VOLUME 5”) to choose from for
each of the earpiece and speaker volumes in the handset and 8 levels
(“VOLUME 1“ to “VOLUME 8“) to choose from for the speaker volumes
in the base.
Using the handset:
During a call:
tPress
/ to select volume 1-5. The current setting is shown.
>When you end the call, the setting will remain at the last selected
level.