EasyManua.ls Logo

AEG BP5003001 - User Manual

AEG BP5003001
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BP5003001
EN
OVEN USER MANUAL

Questions and Answers

  • P
    Pedro LivingstonJul 29, 2025
    Why is my AEG BP5003001 not heating up?
    • K
      Kenneth MillerJul 29, 2025
      Your AEG oven might not be heating up because it is switched off. Ensure that the appliance is switched on. Also, check if the clock is set; if not, set the clock. Incorrect settings could also be the cause, so verify that the settings are correct. The automatic cut-out may be switched on. Finally, check the fuse; if it releases repeatedly, consult an authorized electrician.
  • Y
    ywhiteAug 3, 2025
    What to do if my AEG Oven display shows F102?
    • A
      Alexandria SmithAug 3, 2025
      If the display shows F102, it could be that the door is not closed correctly or the door lock is defective. Make sure the door is correctly closed. If the issue persists, switch off the appliance using the house fuse or safety switch in the fuse box, and then switch it on again. If the display continues to show F102, you have to refer to the Customer Care Department.
  • J
    jkimAug 8, 2025
    What to do if AEG BP5003001 display shows an error code that is not in the manual?
    • G
      gutierreztonyaAug 8, 2025
      If the display shows an error code not listed, it indicates an electronic fault. To resolve this, switch off the appliance using the house fuse or the safety switch in the fuse box, and then switch it on again. If the error code reappears, you have to refer to the Customer Care Department.
  • M
    Mr. Phillip GreenAug 13, 2025
    What to do if pyrolytic cleaning does not operate on AEG BP5003001 and the time display shows 'C3'?
    • V
      valdezdamonAug 13, 2025
      If the pyrolytic cleaning function isn't working and the time display shows 'C3', the door is not correctly closed or the door lock is defective. Ensure that the door is properly closed.
  • C
    Christopher KellyAug 18, 2025
    What to do if pyrolytic cleaning does not operate on AEG Oven and the clock display shows 'C1'?
    • M
      mariewhiteAug 18, 2025
      If the pyrolytic cleaning function isn't working and the clock display shows 'C1', the shelf support or telescopic runners are not removed. Remove the shelf support or telescopic runners.
  • A
    Amanda KellyAug 22, 2025
    How to fix AEG BP5003001 lamp if it does not operate?
    • J
      jonesrichardAug 23, 2025
      If the oven lamp is not working, the oven lamp is defective. Replace the oven lamp.

Summary

SAFETY INFORMATION

Child and Vulnerable People Safety

Safe use guidelines for children and persons with reduced capabilities.

General and Installation Safety

Rules for general operation and appliance installation.

Electrical Connection and Usage Safety

Precautions for electrical connections and appliance usage.

Fire Risk and Cleaning Safety

Safe practices for cleaning, maintenance, and fire prevention.

Pyrolytic Cleaning Safety

Warnings and instructions for safe pyrolytic cleaning operation.

INITIAL SETUP AND DAILY USE

Daily Operation and Oven Functions

How to operate the oven, select functions, and use indicators.

ADVANCED FUNCTIONS AND OPERATION

Child Lock and Control Lock

Instructions for activating/deactivating child and control locks.

CARE AND CLEANING

Drying and Pyrolytic Cleaning Procedures

Procedures for drying foods and safe pyrolytic cleaning.

TROUBLESHOOTING AND ENVIRONMENT

Common Oven Problems and Solutions

Table of common issues, their causes, and solutions.

AEG BP5003001 Specifications

General IconGeneral
TypeBuilt-in
Oven TypeElectric
Energy Efficiency ClassA
Oven SizeLarge
Number of Functions8
Control TypeElectronic
Number of Ovens1
Oven Power3500 W
Voltage230 V
Frequency50 Hz
Installation TypeBuilt-in
ColorStainless Steel
Dimensions (HxWxD)594 x 594 x 567 mm
Power3.5 kW
Oven Capacity71 liters

Related product manuals