How to replace the lamp in AEG Oven?
To replace the lamp in your AEG oven: 1. Turn off the oven and wait until it is cold. 2. Disconnect the oven from the mains. 3. Put a cloth on the bottom of the cavity. 4. Turn the glass cover to remove it. 5. Clean the glass cover. 6. Replace the lamp with a suitable 300 °C heat-resistant lamp. 7. Install the glass cover.
General| Energy Efficiency Class | A |
|---|---|
| Oven Capacity | 71 L |
| Control Type | Electronic |
| Cleaning System | Pyrolytic |
| Dimensions (HxWxD) | 594 x 595 x 567 mm |
| Oven Size | Large |
| Number of Ovens | 1 |
| Energy Consumption (conventional) | 0.99 kWh |
| Color | Stainless Steel |
| Installation Type | Built-in |
| Weight | 36 kg |
| Type | Built-in |
Appliance use by children and persons with reduced capabilities requires supervision.
Appliance is for cooking, single household domestic use, and requires qualified installation.
Appliance must be installed by a qualified person, following instructions and safety guidelines.
All electrical connections must be made by a qualified electrician and must be earthed.
Warnings about operating the appliance, including risks of injury, burns, and electric shock.
Safety warnings for Pyrolytic cleaning, including risks of fumes, heat, and sensitivity for pets.
Guide on how to select heating functions and set the temperature for cooking.
Details standard heating functions like True Fan Cooking, Conventional Cooking, etc.
Guide on how to prepare dishes using the Assisted Cooking function with default settings.
Step-by-step instructions for setting Time of day, Minute minder, and Cooking time.
Instructions and safety precautions for using the pyrolytic self-cleaning function.
Table of common problems and their solutions, or when to contact service.
To Next Page
