Submenu for: Cleaning
Submenu Description
Steam Cleaning Procedure for cleaning the appliance when it is slightly
soiled and not burned several times.
Steam Cleaning Plus Procedure for cleaning stubborn dirt with the support
of an oven cleaner.
Descaling Procedure for cleaning the steam generation circuit
from residual limestone.
Rinsing Procedure for rinsing and cleaning the steam genera-
tion circuit after frequent use of the steam functions.
Submenu for: Basic Settings
Submenu Description
Child Lock When the Child Lock is on, the oven cannot be activa-
ted accidentally. You can activate and deactivate this
function via Basic Setting Menu. Once activated, Child
Lock appears on the display when you turn on the oven.
To enable the oven use, choose the code letters with
the rotary knob in the following order: A B C.
Fast Heat Up Decreases heat up time as a default. Note that it is
available only for some of the heating functions.
Heat + Hold Keeps the prepared food warm for 30 minutes after a
cooking is finished. To turn it off earlier press the rotary
knob. When this function is active the message "Keep
warm started" appears on the display. Note that it is
available only for some of the heating functions and if
Duration is set.
Time Extension To extend predefined cooking time. Note that it is
available only for some of the heating functions.
Setup To set the oven configuration.
Service Shows the software version and configuration.
Submenu for: Setup
Submenu Description
Language Sets the language for the display.
Time of Day Sets the current time and date.
Key Tones Activates and deactivates the tone of the touch fields. It
is not possible to deactivate the tone of the ON / OFF
and STOP.
ENGLISH 15
To Next Page
