What to do if AEG Oven displays error F131 related to steamer sensor temperature?
If your AEG Oven displays error F131, which indicates that the temperature of the steamer sensor is too high, turn the oven off and wait until it cools down, then turn it on again.
Why is my AEG BSE998330M cleaning performance not satisfactory?
If the cleaning performance of your AEG Oven is not satisfactory, it might be because you started cleaning when the oven was too hot. Wait until the oven is cold and then repeat the cleaning process. Also, make sure you have removed all accessories from the oven before cleaning, and repeat the cleaning.
Why is there too much water on the bottom of the AEG BSE998330M Oven cavity after cleaning?
If there's too much water on the bottom of the AEG Oven cavity after cleaning, it's likely because you put too much detergent in the oven before you started cleaning. Next time, evenly spread a thin layer of detergent on the cavity walls.
Why is there dirty water on the bottom of the AEG BSE998330M Oven cavity after descaling?
If there is dirty water on the bottom of the cavity after descaling your AEG Oven, the grill or roasting pan is likely on the wrong shelf position. Remove the remaining water and descaling agent from the bottom of the oven. Next time, put the grill or roasting pan on the first shelf position.
Why is the water drawer of my AEG BSE998330M difficult to clean?
If the water drawer of your AEG Oven is difficult to clean, it may be because the lid and the wave breaker were not removed. Remove the lid and the wave breaker.
What to do if AEG BSE998330M displays error F601 related to Wi-Fi signal?
If your AEG Oven displays error code F601, it indicates a problem with the Wi-Fi signal. Check your network connection.
Why is there no water inside the grill or roasting pan of my AEG BSE998330M after descaling?
If there is no water inside the grill or roasting pan after descaling your AEG Oven, it means that the water drawer was not filled to the maximum level. Check if a descaling agent or water is present in the water drawer body.
Why does water come out of the water drawer of my AEG BSE998330M?
If water comes out of the water drawer of your AEG Oven, it's probably because you did not assemble the lid of the water drawer or wave breaker correctly. Reassemble the lid of the water drawer and wave breaker.
What should I do if the AEG BSE998330M Oven system cannot connect with the control panel (F908)?
If your AEG Oven displays error F908, indicating that the oven system cannot connect with the control panel, turn the oven off and on.
What to do if the AEG BSE998330M wireless signal is weak?
If the wireless network signal to your AEG Oven is weak, try moving the router as close to the oven as possible.
General| Energy efficiency class | A++ |
|---|---|
| Oven capacity | 70 L |
| Oven type | Multifunction |
| Control type | Electronic |
| Temperature range | 30 - 300 °C |
| Self-cleaning | Yes |
| Dimensions (HxWxD) | 595 x 595 x 567 mm |
| Electric oven | Yes |
| Number of ovens | 1 |
| Built-in display | Yes |
| Width | 595 mm |
| Depth | 567 mm |
| Height | 595 mm |
| Installation compartment width | 560 mm |
| Installation compartment depth | 550 mm |
| Installation compartment height | 600 mm |
| Weight | 37.5 kg |
| Grill | Yes |
| Convection cooking | Yes |
| Voltage | 220 - 240 V |
| Frequency | 50/60 Hz |
| Installation Type | Built-in |
| Color | Stainless Steel |
| Door Material | Glass |
| Timer | Yes |
| Child Lock | Yes |
| Cooling Fan | Yes |
| Lighting | Yes |
| Warranty | 2 years |
To Next Page
