Why AEG BSK978330B Oven does not turn on or heat up?
If your AEG oven isn't turning on or heating up, first ensure it's properly connected to the electrical supply. Also, check if the clock is set. Make sure the oven door is fully closed. Verify that a blown fuse isn't the issue, and if it persists, consult a qualified electrician. Finally, check if the Child Lock is activated.
What to do if my AEG Oven has problems with Wi-Fi signal?
If you're experiencing Wi-Fi signal issues with your AEG oven, there are a few things you can try. First, check your wireless network and router, and try restarting the router. If you've recently installed a new router or changed your router configuration, you may need to configure the oven and mobile device again. If the wireless network signal is weak, try moving the router closer to the oven. Additionally, check if a microwave appliance near the oven is disrupting the signal and turn it off.
What to do if my AEG Oven displays error F601 related to Wi-Fi?
If your AEG oven shows error code F601, it indicates a problem with the Wi-Fi signal. Check your network connection.
How to fix error F604 on my AEG Oven after the first Wi-Fi connection failed?
If your AEG oven displays error F604, which means the initial Wi-Fi connection failed, try turning the oven off and then back on, and then try the connection again.
What to do if my AEG BSK978330B Oven displays error F602 or F603 related to Wi-Fi?
If your AEG oven displays error codes F602 or F603, indicating that Wi-Fi is not available, try turning the oven off and then back on.
What does error C2 mean on my AEG Oven during Pyrolytic Cleaning, and how do I resolve it?
If your AEG oven displays error code C2 during Pyrolytic Cleaning, it means the Food sensor is inside the oven cavity. Remove the Food sensor.
What does error C3 mean on my AEG BSK978330B Oven, and what to do?
If your AEG oven displays error code C3, it indicates that the door is not fully closed during Pyrolytic Cleaning. In this case, you should close the door completely.
What does error F111 mean on my AEG BSK978330B Oven, and how to fix it?
If your AEG oven displays error code F111, it means the Food sensor is not correctly inserted into the socket. Fully plug the Food sensor into the socket.
What to do if my AEG BSK978330B Oven displays error F908?
If your AEG oven shows error code F908, which means that the oven system cannot connect with the control panel, turn the oven off and then back on.
General| Oven Type | Multifunction |
|---|---|
| Oven Capacity | 70 L |
| Self-Cleaning | Yes |
| Control Type | Electronic |
| Weight | 40 kg |
| Number of Ovens | 1 |
| Installation Compartment Width | 560 mm |
| Installation Compartment Depth | 550 mm |
| Grill | Yes |
| Convection Cooking | Yes |
| Voltage | 220 - 240 V |
| Frequency | 50/60 Hz |
| Installation Type | Built-in |
| Color | Black |
| Oven Size | Large |
| Type | Built-in oven |
To Next Page
