AEG BSS 4809 - Page 55

English
55
• Keepthe button (1) pressed for ca. 2 seconds to turn off the loudspeakers again. The
units are disconnected.
NOTE:
• Tosavethebattery,switchoffthespeakerwhennotinuse.
• IfnosuitableplaybackdeviceisrecognizedinBluetoothmodewithin5minutes,
the device will automatically switch to standby.
Pause (1)
• Brieypressthebuttontopauseplayback.
• Pressthebuttonagaintocontinueplayback.
NOTE:
Depending on the device manufacturers, models, and software versions you need to
start the music playback in your player.
Adjust Volume (3/9)
Press the
(3) and (9) buttons to set the desired volume.
NOTE:
The volume on the playback device may not be set too low and not too high either. It
could otherwise result in background noises.
Accepting / Ending call
• Pressthe
(10), to accept an incoming call.
• Toendthecall,pressthebuttonagain.
NOTE:
Duringanincomingphonecall,themusicplaybackwillstop.Afterendingthephone
call, the track will continue to play.
Calling the last dialed number
Press the
button (10). The number you called last with your mobile phone will be called.
To end the conversation, press the button (1).
NOTE:
Your mobile phone must support this function.