English
26
1xUSBconnectioncable(USBA/B)
1xstereocinchcable
Connections and general information
Power supply
• Makesurethemainsvoltageofyourwallsocketcorre-
sponds to the voltage on the rating plate of the appli-
ance.
• MakesurethePOWERswitchissetto“0”.
• Connectthemainscabletojack8oftherightspeaker
box.
• Connectthemainsplugtoaproperlyinstalledisolated
ground receptacle.
Connecting left and right speaker boxes
• Theapplianceisdeliveredwitha5-meterlongconnec-
tion cable.
• Usethiscabletoconnectthejacks9and10ofthespeak-
ers.
NOTE: Pay attention to the shapes of the plugs!
Connecting audio and data sources
Would you like to connect your Bluetooth sound system to a
PCoranaudiosystem?
For doing so, please use one of the connection cables
included in the delivery scope.
NOTE:
• Whenconnectingthecables,pleaseobservetheuser
instructions of your PC or audio system.
• WhenpoweringtheBluetoothsoundsystemviaUSB
connection with a PC, please follow the on-screen
instructions.
• Incasetheplugsdonottyourexternaldevices,you
may purchase appropriate adapter cables available in
specialty department stores.
Installation location
Formaximumsoundentertainment,considerthefollowing
when installing your Bluetooth sound system.
• Chooseastable,level,andanti-slipsurface.
• Thespeakersshouldbelocatedatfacelevel.
• Placethespeakersatanangleof60°eachfromthemain
seating position.
Operation
Switching the appliance on
• UsethePOWERbuttontoswitchontheappliance.The
VOLUME / INPUT control on the front will light up red,
indicating that the appliance is in standby mode.
NOTE:
Afterapprox.25minuteswithoutanysignalinput,theappli-
ance will automatically switch into standby mode. Press the
VOLUME / INPUT control to use the appliance again.
Selecting a sound source
The VOLUME / INPUT control can be used to set the desired
volume level and furthermore to select a function mode.
• PresstheVOLUME/INPUTcontrol;changingcolors
indicate the following modes:
Purple/blue = AUX
Blue = Bluetooth
Green = USB
Orange/green = TRS
• PressandholdtheVOLUMEcontrolfor2secondsto
switch into standby mode (red).
Volume
Turn the VOLUME / INPUT control to set the desired volume
level.
Sound
• InAUX,TRS,andBluetoothmodes,pleasesetthevol-
ume at the source device to a suitable level.
• Usethesettingsofslideswitch6toemphasize(+2db)or
mufe(-4db)high-pitchedtones.
Information on the wireless Bluetooth connection
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
canbecausedforexamplebyWLAN-networks,DABradios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enableddevice.Thefunctionalradiusislimitedtoapprox.15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Loggingondevices(Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
To Next Page
Loading...
