What to do if there is no audio via Bluetooth on my AEG Speaker System?
If you're not getting any sound via Bluetooth, here's what to check: * First, make sure that the speaker is actually connected to your audio source. If it isn't, pair them again. * Next, verify that the volume isn't set too low. Increase the volume both on the speaker itself and on your audio source (like your phone or computer).
Why won't my AEG Speaker System connect via Bluetooth?
If your speaker isn't connecting, there are several potential reasons: 1. Confirm that your audio source supports the A2DP protocol. 2. Ensure that the audio source device is powered on. 3. Check that Bluetooth is enabled on the audio source. 4. The Bluetooth version may not be supported, try using a different playback unit.
Why is my AEG Speaker System making a whistling sound when I use the microphone?
The whistling sound you're hearing is likely audio feedback. To resolve this, use the microphone at a greater distance from the speaker, outside of its reverberation range.
General| Brand | AEG |
|---|---|
| Model | EC 4834 |
| Category | Speaker System |
| Language | English |
To Next Page
