AEG BSS 4817 - Operation

English
51
NOTE:
• Someofthemobilephonebrandshaveanenergy-savingmode.Deactivate
the energy-saving mode as it can otherwise result in problems during the data
transfer through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedstostayactivatedinyour
player. Observe the operation manual of your player.
• Ifamobilephoneonwhichyouareplayingmusicreceivesacall,themusicwillbe
interrupted. Press the / button (6), to accept the call. The sound is replayed
by the loudspeaker. Speak into the microphone on the device or transfer the
conversation to your mobile phone. To do this, observe the overlay in the display
of the mobile phone. After you have ended the call, the devices are connected
to each other again and playback continues.
Operation
The device is equipped with multi functional buttons. For different functions press the
respective button briefly or press and hold.
On/Off (1)
• Turnontheloudspeakerbypressingthe
button (1). The charging indicator
light /Bluetooth indicator light (2) will start to blink.
NOTE : Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected
automatically. The prerequisite for this is:
• Thedeviceswerealreadyconnectedwitheachother.
• Bluetoothisactivatedinyourplayer.
• Keepthe
button (1) pressed for ca. 2 seconds to turn off the loudspeakers
again. The units are disconnected.
NOTE :
• Tosavethebattery,switchoffthespeakerwhennotinuse.
• IfnosuitableplaybackdeviceisrecognizedinBluetoothmodewithin
5 minutes, the device will automatically switch to standby.