Preheat the two ovens
before first use. Heat up one
oven at a time.
Set the functions listed
below, if applicable.
1. Set the function . Set the
temperature to 250ºC.
2. Let the oven operate for 1 hour.
3. Set the function
. Set the
temperature to 250ºC.
4. Let the oven operate for 15 minutes.
5. Set the function . Set the
temperature to 250ºC.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Hob control panel
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sen‐
sor
field
Function Comment
1
- Heat setting display To show the heat setting.
2
- Timer indicators of cooking
zones
To show for which zone you set the time.
3
- Timer display To show the time in minutes.
4
- To select the cooking zone.
5
/
- To increase or decrease the time.
ENGLISH 11
To Next Page
Loading...
Need help?
General
