EasyManuals Logo

AEG CIB6742MCB User Guide

AEG CIB6742MCB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Problem Possible cause Remedy
comes on the hob display.
Automatic Switch Off operates. Deactivate the hob and activate it
again.
comes on the hob display.
The Child Safety Device or the Lock
function operates.
Refer to "Hob - Daily use" chapter.
comes on the hob display.
There is no cookware on the zone. Put cookware on the zone.
comes on the hob display.
The cookware is incorrect. Use the correct cookware. Refer to
"Hob - Hints and tips" chapter.
comes on the hob display.
The diameter of the bottom of the
cookware is too small for the zone.
Use cookware with correct dimen‐
sions. Refer to "Hob - Hints and
tips" chapter.
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not set. Make sure that the settings are cor‐
rect.
The lamp does not operate. The lamp is defective. Replace the lamp.
The display shows "12.00". There was a power cut. Reset the clock.
Steam and condensation settle on
the food and in the cavity of the
oven.
You left the dish in the oven for too
long.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
There is no good cooking perform‐
ance using the Steam Bake func‐
tion.
You did not fill the cavity emboss‐
ment with water.
Refer to "Activating the Steam Bake
function".
The water in the cavity embossment
does not boil.
The temperature is too low. Set the temperature at least to
110°C. Refer to "Oven - Hints and
tips" chapter.
The water comes out of the cavity
embossment.
There is to much water in the cavity
embossment.
Deactivate the oven and make sure
that the appliance is cold. Wipe the
water with a cloth or sponge. Add
the correct amount of water to the
cavity embossment. Refer to "Acti‐
vating the Steam Bake function".
13.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
We recommend that you write the data
here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
36 ENGLISH

Other manuals for AEG CIB6742MCB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG CIB6742MCB and is the answer not in the manual?

AEG CIB6742MCB Specifications

General IconGeneral
BrandAEG
ModelCIB6742MCB
CategoryCookers
LanguageEnglish

Related product manuals