Preheat the two ovens before first use.
Heat up one oven at a time.
Set the functions listed below, if
applicable.
For function: Steam Bake refer to "Daily
use" chapter, Setting the function: Steam
Bake".
1. Set the function . Set the temperature
to 250ºC.
2. Let the oven operate for 1 hour.
3. Set the function . Set the temperature
to 250ºC.
4. Let the oven operate for 15 minutes.
5. Set the function . Set the temperature
to 250ºC.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool down.
Accessories can become hotter than usual.
The oven can emit an odour and smoke.
Make sure that the airflow in the room is
sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Hob control panel
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
Sensor
field
Function Comment
1
- Heat setting display To show the heat setting.
2
- Timer indicators of cooking zones To show for which zone you set the time.
3
- Timer display To show the time in minutes.
4
- To select the cooking zone.
ENGLISH 11
To Next Page
Loading...
Need help?
General
