35
Inserting the glass door panels
3
The three removeable glass panels
differ in size.
They will only fit into the section of
the door for which they are de-
signed.
Smallest panel - at the bottom
Largest panel - at the top
Re-insert the three panels one at a
time and in the appropriate order:
1. Insert the glass panel at an angle
from above into the section of the
door in which the handle is located.
2. Lower the glass panel and push
against the spring on the handle
side.
3. Slide it under the lower bracket to-
wards the lower door edge as far as
it will go.
Each glass panel must be firmly in
position and fit exactly into the
door frame!
Re-hang the oven door
To Next Page
Loading...
