AEG Corded Telephone Style 15 - Setting up Your Telephone

6
6. Wait while the display shows “INITIALISATION”, then the announcement “Answering machine on.
Announcement one.” before the display changes to the standby screen.
7. Lift the handset and check for dial tone
Note:
tThe base unit doesn’t require a battery.
tAlways use the telephone line cord supplied with your phone. Other telephone line cords may not
work.
7 SETTING UP YOUR TELEPHONE
The following section details how to set up your telephone. Press the menu button to enter the
options menu and then use the up
or down buttons to cycle through the following options:
SET LANGUAGE
SET TIME/DATE
SET FLASH TIME
LCD CONTRAST
MESSAGE LENGTH
RINGS TO ANSWER
REMOTE ACCESS
TAM HD: ON/OFF: To set the answering machine recording quality / total recording
time. (“ON“ gives up to 20 minutes of higher quality, “OFF“ gives up to 40 minutes
of lower quality.)
EXIT OPTIONS
Note:
The system will time out if you leave more than 10 seconds between key presses.
7.1 Set language
With the phone in standby mode;
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up button
to go to the language setting.
>The display shows “SET LANGUAGE“
tPress the OK button
to confirm.
tPress the up
or down button to select “ENGLISH” (default), “FRANCAIS” or “DEUTSCH”.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
7.2 Set time / date
Note:
If you subscribe to the caller display service (see “11 CALLER DISPLAY OPERATION”) the time and
date will be set automatically, but the year may still need to be adjusted to ensure the answering
machine time stamp gives the correct day.
tPress the menu button
.
>The display shows “OPTIONS MENU“.