Function Description
1
Lamp Turns the lights on and off.
2
First speed / Off The motor switches to first speed level. Second press turns off the ap‐
pliance.
3
Second speed The motor switches to second speed level.
4
Third speed The motor switches to third speed level.
5
Maximum speed The motor switches to maximum speed level. After 5 minutes appli‐
ance switches to third speed.
6
Filter notification Reminds to change or clean the charcoal filter and clean the grease
filter.
7
Hob²Hood Indicator of the function to control hood from hob. For some models
the symbol is present on the control panel.
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or
burners.
While boiling and frying big quantities of food without a lid, big humidity. After 5 minutes the appli‐
ance returns to previous setting.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
To operate the hood:
1. Press the first speed button to switch
on the appliance.
2. If needed, change the speed by pressing
the desired button.
The hoods light works independently to
other hood functions. To illuminate the
cooking surface press the light button .
To turn off the appliance press the first speed
button again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
58
To Next Page
Loading...
