79
Installing the front panel (see also “Special accessories”)
• Remove first the rear then the front grease filters.
• Remove the internal cover pressing both unlocking devices (press and
pull). Fig. 16.
CHDF 6260 - DF 6260-M9:If mounted, remove the existing front
unscrewing the screws fixing it to the extractable drawer.
• Predrill the front panel as per template and fix it to the visor with 3
screws. Fig. 17-18.
• Clip the Internal cover back in and insert both grease filters (first the
front one and then the rear one).
Fig. 16
Fig. 18
Fig. 17
To Next Page
Loading...
