Need help?Do you have a question about the AEG DLE0630B and is the answer not in the manual?
This document is a user manual for an AEG cooker hood, specifically models DLE0630B and DLE0630W. It provides comprehensive instructions for installation, safe operation, daily use, and maintenance of the appliance.
The AEG cooker hood is designed for domestic use above hobs, cookers, and similar cooking devices to extract smoke, steam, and odors from the cooking area. It features a control panel with distinct buttons for various functions, including lighting and different fan speeds. The appliance is equipped with a motor that can operate at multiple speed levels, allowing users to adjust the extraction power according to their cooking needs. There's a first speed for general use, a second speed for increased extraction, a third speed for more demanding cooking, and a maximum speed for intense situations, which automatically reverts to the third speed after 5 minutes. The cooker hood also includes a lamp to illuminate the cooking surface.
A notable usage feature is the inclusion of a remote control, which comes pre-enabled, allowing for convenient operation from a distance. The manual provides guidance on how to connect or disconnect the remote control, which involves a specific sequence of button presses on the appliance's control panel. The recommended operating speeds are detailed based on the type of cooking, ranging from heating food with covered pots (lowest speed) to boiling and frying large quantities of food without a lid, especially in high humidity conditions (highest speed). It is advised to keep the hood operating for approximately 15 minutes after cooking to ensure complete extraction of residual fumes and odors.
Safety is a paramount aspect emphasized throughout the manual. It outlines general safety precautions, particularly concerning children and vulnerable people, stressing the importance of supervision and keeping packaging away from them. The manual also highlights the need for proper installation by a qualified person to prevent electrical hazards, injuries, or damage to the appliance. Users are warned about accessible parts becoming hot during use and the risks associated with improper electrical connections or damaged supply cords. The appliance is intended solely for cooking purposes, and users are cautioned against using it for other functions, changing its specifications, or operating it with wet hands. Specific warnings are given against flambéing under the appliance, using it to exhaust hazardous materials, or using uncovered electric grills.
Maintenance features are thoroughly explained to ensure the longevity and optimal performance of the cooker hood. Regular cleaning of the appliance and its grease filters is crucial, with a recommendation to clean grease filters at least every two months to prevent the accumulation of fat deposits, which could pose a fire risk. The manual specifies that grease filters can be washed in a dishwasher, provided it's set to a low temperature and a short cycle, noting that discoloration of the filter does not affect its performance. For cleaning the appliance's surface, a soft cloth with warm water and a mild detergent is recommended, with strict warnings against abrasive detergents, brushes, steam cleaners, water sprays, or sharp metal scrapers.
The manual also details the process for cleaning and replacing the grease filters, which are mounted with clips and pins. Users are instructed to pull open the cover, press the mounting clip, and tilt the filter downwards to remove it. After cleaning, the filters are re-mounted in reverse order. For models equipped with a charcoal filter, the manual explains that these filters are non-washable and must be replaced approximately every 4 to 6 months, or more frequently depending on usage. The replacement process involves removing the grease filters first, then the clips holding the charcoal filter bed, and finally the filter bed itself. Installation of a new charcoal filter follows the reverse steps.
Regarding the lighting, the appliance uses LED lamps and a separate control gear (LED driver). The manual states that these parts can only be replaced by a technician, directing users to the "Service" section of the safety instructions in case of any malfunction. The importance of using original spare parts for repairs is also underscored, and users are advised to contact an Authorised Service Centre, providing specific appliance data such as Model, PNC, and Serial Number, which can be found on the rating plate. The manual also provides contact information for AEG's support, registration, and online shop for accessories and spare parts.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Number of Speed Settings | 3 |
| Noise Level | 62 dB |
| Lighting | Yes |
| Filter Type | Aluminium |
| Colour | Black |
| Lighting Type | LED |
| Control Type | Push button |
| Material | Stainless steel |
To Next Page
