Function Description
8
Hob²Hood Indicator of the function to control hood from hob.
9
Lamp Turns the lights on and off.
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or
burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking
on multiple cooking zones or burners.
While boiling and frying big quantities of food without a lid, big hu‐
midity.
Refreshes the air in kitchen after cooking at a very low noise level.
It can be activated and de-activated by touching the symbol. The
function turns off automatically after 60 minutes. Use after cooking
only.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field. Touch
the symbols for 1 second to activate the
functions.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
3. If needed, touch the light symbol
to
illuminate the cooking surface.
To turn off the appliance press the symbol
again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
5.3 Activating Maximum Motor
Speed
When you touch , the Maximum Motor
Speed starts to operate for 8 minutes. After
that time, the appliance returns to its previous
speed settings.
ENGLISH 7
To Next Page
Loading...
