How to fix no picture on AEG DVK 4628?
If there's no picture on your AEG Set-top box, please ensure the HDMI cables are correctly plugged in. Also, verify that all connected devices are switched on and that your TV is set to the correct input.
What to do if there is no sound on AEG DVK 4628?
If you can't hear any sound from your AEG Set-top box, first check that the HDMI cables are properly connected. Then, make sure that the volume of both the signal source and your TV are not set too low.
Why is my AEG DVK 4628 Set-top boxes remote control not working?
If the remote control for your AEG Set-top box isn't working, first ensure the battery is correctly inserted. If it still doesn't work, the battery may be empty and needs replacing. Also, make sure there are no obstructions between the remote control and the infrared receiver on the 3D TV box.
How to reset AEG DVK 4628 that cannot be operated?
If your AEG Set-top box cannot be operated, disconnect the mains plug for about 5 seconds, and then switch the unit back on.
General| Audio Output | Stereo |
|---|---|
| USB Port | Yes |
| HDMI Output | Yes |
| SCART Output | Yes |
| EPG | Yes |
| Teletext | Yes |
To Next Page