15
D
GR
NL
F
GB
GB
2. Place the base unit on a rm and at
surface. Plug the mains plug into a
wall socket. Redundant cord can be
wound up at the bottom of base unit.
1. Before rst use: Boil water in the
kettle and pour it out. Repeat for
2 or 3 times. This will remove any
remaning dust or residues.
(See the following steps on how to
use the kettle).
Wipe the outside of the kettle with a
damp cloth.
3. Press the Open lid button to open
the lid. Fill the kettle with fresh tap
water to the desired level (Min. 0.5L -
Max.1.5L).
Getting started
5. The automatic switch o function.
When the water has boiled or the
kettle is moved from the base, it will
switch o automatically. If you wish to
stop the heating process before the
water is boiling, simply lift up the ON/
OFF switch to the OFF position.
4. Close the lid and make sure it snaps
in correctly. Otherwise the auto
switch o function will not work
reliably. Place the kettle onto the
base. Press down the ON/OFF switch;
the indicator light will illuminate and
the kettle will start to heat up.
To Next Page
Loading...
