Problem Possible cause Possible solution
There are bluish layers on
glasses and dishes.
The rinse aid dosage is too
high.
Set the rinse aid dispenser
to a lower position.
The detergent can be the
cause.
Try a different brand of de-
tergent.
The dishes are wet and dull. A programme without a dry-
ing phase has been selec-
ted.
Set a programme with a dry-
ing phase.
The rinse aid dispenser is
empty.
Fill the rinse aid dispenser
with rinse aid.
9.3 Error codes
Code Meaning Possible cause
E1 Longer inlet time Tap is not open or water in-
take is restricted or water
pressure is too low
E4 Overfilled Too much inlet water or
some dishwasher element
leaks
10. INSTALLATION
10.1 Assembly
Make sure to position the
appliance with minimum
space of 50mm on both
sides of fully open door.
Keep 5 mm distance between both sides
of the appliance and the cabinet. There
are two possibilities for the cabinet hole
for the appliance.
1
Power cord, drain hose and water
supply line hole. To facilitate a
proper installation, position the hole
to the right or the the left of the
appliance.
ENGLISH
15
To Next Page
Loading...
