AEG FBB33617ZM - User Manual

This document is a user manual for the AEG FBB33617ZM and FBB33617ZW dishwashers. It provides comprehensive information on safety, installation, operation, maintenance, and troubleshooting.

Function Description

The AEG dishwasher is designed for cleaning household-type dishes and tableware in an indoor environment. It offers various programmes and options to achieve optimal cleaning and drying results while considering water and energy consumption. Key functions include:

Dishwashing: Utilizes different programmes (ECO, 160min, 90min, 60min, 30min, AUTO, and an internal cleaning programme) with varying temperatures and durations to handle different degrees of soil and load types.
Water Softener: Removes minerals from the water supply to prevent limescale buildup and improve washing results. The softener level is adjustable based on water hardness.
Rinse Aid Dispenser: Automatically releases rinse aid during the final rinse to prevent streaks and stains, improving drying performance.
AirDry Function: Enhances drying results and reduces energy consumption by automatically opening the appliance door during the drying phase.
Delay Start: Allows users to postpone the start of a programme for up to 24 hours.
Options: Includes GlassCare (protects delicate items), ExtraPower (improves washing results by increasing wash temperature and duration), and ExtraHygiene (provides better cleaning by maintaining high temperatures during the final rinse).
Internal Cleaning Programme: Specifically designed to clean the inside of the appliance, removing limescale and grease buildup.

Important Technical Specifications

Electrical Connection: Voltage 220-240 V, Frequency 50 Hz.
Water Supply Pressure: Minimum 0.5 bar (0.05 MPa) / Maximum 10 bar (1.0 MPa).
Water Supply Temperature: Cold water or hot water up to max 60 °C.
Capacity: 13 place settings.
Dimensions (Width / Height / Depth): 597 / 818-878 / 576 mm.
Water Consumption (ECO programme): 9.9 liters.
Energy Consumption (ECO programme): 0.835 kWh.
Duration (ECO programme): 240 minutes.
Maximum Number of Place Settings: 13.
Water Inlet Hose: Equipped with a safety valve and an inner mains cable.

Usage Features

Control Panel: Features an on/off button, program button, programme indicators, display, delay button, option button, indicators (salt, rinse aid, washing phase, rinsing phase, drying phase, delay, GlassCare, ExtraPower, ExtraHygiene), and start button.
Programme Selection: Users can select programmes by repeatedly pressing the Program button. The display shows the programme duration.
Option Activation: Options like GlassCare, ExtraPower, and ExtraHygiene can be activated by pressing the Option button until the corresponding indicator is on.
User Mode: Allows adjustment of water softener level, rinse aid empty notification, and AirDry activation/deactivation. Access by pressing and holding Delay and Option simultaneously until ECO, 160min, and 90min indicators flash and the display is blank.
Detergent Dispenser: Compartment for powder or tablet detergent. A small quantity can be placed on the inner part of the door for prewash phases.
Salt Container: Located at the bottom of the appliance, filled with rough salt to regenerate the water softener.
Rinse Aid Dispenser: Located inside the door, filled with rinse aid to improve drying. The released quantity is adjustable.
Auto Off Function: Automatically deactivates the appliance when a programme is complete or after 5 minutes if a programme was not started, saving energy.
Loading Baskets: The appliance includes an upper basket, lower basket, and cutlery basket. Items should be arranged to allow water to reach all surfaces and prevent movement. Hollow items should face downwards.
Door Opening during Programme: Opening the door stops the appliance and may affect energy consumption and programme duration. If opened for more than 30 seconds during the drying phase (unless by AirDry), the programme ends.
Multi-tabs Usage: If using multi-tabs containing salt, the salt refill indicator may remain active as they may not be effective enough to soften hard water. It is recommended to set the proper water hardness level regardless of detergent type.

Maintenance Features

Filter System Cleaning: The filter system consists of three parts (flat filter, main filter, microfilter) that need regular cleaning to prevent unsatisfactory washing results and damage to the drain pump. The process involves turning, removing, washing, and reassembling the filters.
Spray Arm Cleaning: The lower spray arm can be removed and cleaned by hand to prevent clogging of the holes. The upper spray arm should not be removed, but its openings can be cleaned with a thin pointed object.
Internal Appliance Cleaning: The interior should be cleaned with a soft damp cloth. A cleaning product designed for dishwashers should be used at least once every two months, ideally with the automatic cleaning programme, to prevent grease and limescale buildup.
External Appliance Cleaning: The exterior should be cleaned with a moist soft cloth and neutral detergents. Abrasive products, pads, sharp tools, strong chemicals, scourers, or solvents should not be used.
Door Gasket Cleaning: The rubber gasket on the door should be wiped clean once a week.
Troubleshooting Guide: The manual provides a table of common problems and alarm codes with corresponding possible causes and solutions, enabling users to resolve minor issues without contacting service.
Service Information: For repairs, users are directed to an Authorised Service Centre. Original spare parts are available for 7 to 10 years after the model is discontinued, depending on the part. Self-repair is discouraged due to safety risks and potential warranty voidance.