This document is a user manual for the AEG FSE83710P dishwasher. It provides comprehensive information on safety, product description, control panel, programs, settings, daily use, hints and tips, care and cleaning, troubleshooting, and technical specifications.
Function Description
The AEG FSE83710P is a dishwasher designed for household use, capable of washing crockery, cutlery, pots, and pans. It features various programs tailored to different soil levels and load types, including an ECO program for efficient water and energy consumption, an AUTO SENSE program that automatically adjusts settings based on soil and load, and a PRO ZONE program for mixed soil loads. The appliance incorporates the AirDry system, which automatically opens the door during the drying phase to improve drying results and reduce energy consumption. It also includes a TimeBeam feature that projects program information onto the floor.
Important Technical Specifications
- Capacity: 15 place settings.
- Dimensions (Width / Height / Depth): 596 / 818-898 / 550 mm.
- Electrical Connection:
- Voltage: 200 - 240 V.
- Frequency: 50 / 60 Hz.
- Water Supply Pressure:
- Minimum and Maximum (bar): 0.5 - 8.
- Minimum and Maximum (MPa): 0.05 - 0.8.
- Water Supply Temperature: Max 60 °C (cold or hot water connection, with hot water recommended from alternative energy sources for reduced consumption).
- Power Consumption:
- Left-on mode: 5.0 W.
- Off-mode: 0.10 W.
- Consumption Values (ECO program - P1):
- Water: 11 liters.
- Energy: 0.857 kWh.
- Duration: 232 minutes.
- Internal Light: The appliance has an internal lamp that illuminates when the door is open.
Usage Features
The dishwasher offers a range of features to optimize washing and drying performance:
- Control Panel: Equipped with an on/off button, display, Delay button, Program button, ExtraHygiene button, TimeSaver button, XtraDry button, Reset button, and various indicators (End, Rinse aid, Salt).
- Programs:
- P1 ECO: Standard program for normal soil, crockery, and cutlery, with prewash, wash at 50 °C, rinses, and dry.
- P2 AUTO SENSE: Automatically adjusts settings for all types of soil and loads, with wash temperatures ranging from 45 °C to 70 °C.
- P5 PRO ZONE: For mixed soil, with heavy soil in the lower basket and normal soil in the upper basket, featuring wash at 50 °C and 65 °C.
- P3: For heavy soil, crockery, cutlery, pots, and pans, with wash at 70 °C.
- P6: For normal or light soil, delicate crockery, and glassware, with wash at 45 °C.
- P4 30 MIN: Quick program for fresh soil and half-loads, with wash at 60 °C or 65 °C.
- P8: Rinse program to prevent food remains from bonding.
- P7 SILENT: Quiet program with reduced pump speed, resulting in a longer duration.
- Settings (User Mode):
- Water Softener Level: Adjustable based on water hardness (10 levels).
- Acoustic Signal: Activation/deactivation of the end-of-program signal.
- TimeBeam Colour: Selection of projection colour or deactivation.
- Rinse Aid Empty Notification: Activation/deactivation.
- Rinse Aid Dosage: Adjustable level (0A to 6A).
- AirDry: Activation/deactivation.
- Options:
- ExtraHygiene: Maintains 70 °C for at least 10 minutes during the last rinse for better hygiene. This is a permanent setting for most programs but must be manually selected for ECO.
- TimeSaver: Reduces program duration by approximately 50% by increasing water pressure and temperature. Cannot be combined with XtraDry.
- Delay Start: Allows setting a delay from 1 to 24 hours before the program starts.
- Detergent and Rinse Aid: Separate compartments for detergent and rinse aid. The rinse aid dispenser automatically releases rinse aid during the hot rinse phase.
- Salt Container: For dishwasher salt to recharge the water softener resin.
- Auto Off Function: Automatically deactivates the appliance after 5 minutes of inactivity or program completion to save energy.
- Loading Baskets: Recommendations for optimal loading, including placing hollow items face down, ensuring glasses do not touch, and using the cutlery drawer for small items.
Maintenance Features
- Filter Cleaning: The filter system, consisting of three parts (flat filter A, filter B, and filter C), requires regular cleaning to ensure optimal washing results. The manual provides detailed steps for disassembling, washing, and reassembling the filters.
- Spray Arm Cleaning: The upper spray arm should be cleaned regularly to prevent clogged holes. Instructions are provided for removing, washing, and re-engaging the spray arm.
- External Cleaning: The appliance should be cleaned with a moist soft cloth and neutral detergents. Abrasive products, cleaning pads, or solvents should be avoided.
- Internal Cleaning: The appliance's interior, including the rubber gasket of the door, should be cleaned with a soft damp cloth. Regular use of short programs may lead to grease and limescale deposits, so running long programs or using specific dishwasher cleaning products at least twice a month is recommended.
- Troubleshooting: The manual includes a comprehensive troubleshooting guide for common issues and alarm codes, offering possible causes and solutions before contacting an Authorized Service Centre.
- Salt and Rinse Aid Refill: Indicators on the control panel notify the user when salt or rinse aid needs to be refilled.
- Water Softener Adjustment: The water softener level should be adjusted according to local water hardness for optimal washing results.
Need help?
General
To Next Page
