To Next PageTo Next Page
Need help?Do you have a question about the AEG H 500 and is the answer not in the manual?
General| Power Input | 500 W |
|---|---|
| Power | 500 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Source | Corded |
Specifies the power output rating of the different planer models.
Indicates the maximum width the planer can process.
Defines the adjustable depth for material removal during planing.
Specifies the maximum depth for creating rabbets or grooves.
The rotational speed of the blades when not under load.
The net weight of the planer unit itself.
Measures sound pressure and power levels for user safety.
Information on vibration levels for user comfort and health.
Essential safety guidelines for operating the planer.
Mandates wearing ear protection, goggles, gloves, and protective clothing.
Covers safe operation, unplugging for work, and keeping guards clear.
Advises on dust absorption systems and masks due to potential health risks.
Defines the planer's capability for surfaces, rebates, bevels, and chamfers.
States that the product should only be used as specified for normal use.
Guidance on positioning the planer and starting operation.
Instructions on how to operate the protective swing guard.
Details on using the V-groove for safe edge chamfering.
Procedure for setting the planing depth and chamfer size.
Requirement to use two blades with different groove numbers.
Keeping ventilation slots clear and cleaning resin-stained parts.
Recommendation for periodic checks of carbon brushes at service centers.
Use only AEG accessories and spare parts; contact service for replacements.
Information on how to order an exploded view drawing of the tool.
Connect to single-phase AC current matching the rating plate voltage.
Indicates compatibility with sockets without an earth contact.
Symbol indicating disconnection of plug before maintenance.
Indicates an accessory not included in standard equipment.
