To Next PageTo Next PageWhy does the AEG Hob command zone switch off?
The AEG Hob command zone may switch off because the temperature inside the electronic parts is too high. To resolve this, wait for the hob to cool down before using it again.
What to do if my AEG Hob interface switches off after 10 seconds?
If the AEG Hob interface switches off after 10 seconds, it's likely due to continuous key activation being detected. This usually happens when water, pots, or kitchen tools are on the user interface. To resolve this issue, clean the surface of the hob and remove any objects that may be present.
Adhere to manual instructions, check for damage, and understand optional accessories for safe use.
Ensure proper electrical connection, earthing, and installation by qualified personnel.
Be aware of hot surfaces, child safety, pacemakers, fire risks, and proper cooking procedures.
Understand hob operation, container requirements, and energy-saving tips for efficient use.
Details on installing the extractor fan in external or recirculation modes.
Detailed steps for connecting the appliance to the electrical network, including safety checks.
Steps for mounting the appliance, including cabinet preparation and adhesive sealant application.
Explains the control panel layout, keys, displays, and basic hob/extractor activation.
Covers Power Booster, Bridge Zones, Temperature Manager, Key Lock, Child Lock, Timer, Recall, and Automatic Heat UP.
Details on operating the extractor fan, speed, timer, filter indicators, and Hob2Hood function.
Instructions for cleaning the hob surface, including important precautions and recommended cleaning methods.
Guidance on cleaning the extractor fan, grease filters, and maintenance of activated carbon filters.
Lists error codes, solutions, and steps before contacting customer service for assistance.
General
