For maximum duration values,
refer to "Technical data".
5.7 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
First set the heat setting, then set the
function.
1. Touch
to activate the function or
change the time.
The timer digits and the indicators
and come on the display.
If the timer is not set, and disappear
after 3 seconds.
2. Touch or to set the time (00 - 99
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
, and
disappear.
When the time comes to an end, a signal
sounds and flashes. To stop the signal,
touch
.
To deactivate the function: touch . The
indicators and come on. Use or
to set on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.
Minute Minder
You can use this function when the hob is
activated but no cooking zone operates.
Place a pot on a cooking zone to see
symbol.
1. Touch to activate the function.
2. Touch or to set the time.
The function starts automatically after 4
seconds.
When you set the function, you can remove
the pot.
When the time comes to an end, a signal
sounds and flashes. Touch to stop
the signal.
To deactivate the function: touch . The
indicators and light up. Use or
to set on the display.
The function has no effect on the
operation of any cooking zone.
5.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function is active, , or
symbols can be used.
Press
to activate the function.
The heat setting is lowered to 1.
To deactivate the function: press . The
previous heat setting comes on.
5.9 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
Set the heat setting first.
Touch
to activate the function.
To deactivate the function, touch
.
When you deactivate the hob,
you also deactivate this function.
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
Activate the hob first and do not set the heat
setting.
Touch until signal sounds and the
indicator comes on to activate the function.
The control bars disappear. Deactivate the
hob.
When you deactivate the hob,
the function is still active.
ENGLISH 11
To Next Page
Loading...
