AEG K 19 E - Technical Data; Electrical Connection; Optimum Operating Conditions

OPERATION
The K19E air-conditioner is a compact, highly
versatile, electronically controlled unit. It can be
used in the home to provide air-conditioning in
summer, heating in spring and autumn and also
to dehumidify areas where excessive humidity is
likely to build up, such as cellars, etc.
Electrical connection (U.K. only)
| WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow: Earth
Blue: . Neutral
Brown: Live
As the colours of the wires in the mains lead may
not correspond with the coloured markings
identifying the terminals in your plug, proceed as
follows:
The green and yellow wire must be connected to
the terminal in the plug marked with the letter E or
the earth symbol <L or coloured green or green
and yellow. .
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
The brown wire must be‘connected to the terminal
marked with the letter L or coloured red.
TECHNICAL DATA
Power supply T/NP/E ~230 V 50 Hz
Maximum input power
(air-conditioning mode) 690 W
Cooling capacity 1890 W
¢ outside temperature 35°C, 48% relative humidity
e inside temperature 27°C, 41% relative humidity
Maximum input power
(heating mode) 2000 W
Fan speeds 3
Air flow min 250 m°/h
medium 340 m*/h
max 370 mv/h
Dehumidifying capacity 1,0 I/h
(depends on ambient temperature and relative
humidity)
Timer 24 h
Thermostat range from 20°C to 32°C
Dimensions:
e width | 458 mm
e height 850 mm
e depth 400 mm
° weight 40 kg
OPTIMUM OPERATING CONDITIONS
FOR AIR-CONDITIONING
Room temperature 21 : 32°C
Humidity in the room less than 80%
17