6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Control panel
B. Water tank
C. Water level indicator
D. Hinged lid
E. Filter holder with antidrip valve
F.
G. Warming plate
H. Power cord & plug
I. ON/OFF switch with power indicator light
J. Program button
K. Display
L. Hour button
M. Minute button
N. Aroma button
O. Auto On button
Picture page 2-3
GETTING STARTED
1 Setting/changing time.
MIN button to set the required time. Time can be changed at any time, even under program mode. Simply press the
HOUR and MIN button, the time changes at once. Note: if you unplug the machine, the time needs so be set again.
2
the machine with the ON/OFF switch. Let a full tank of water pass through the machine once or twice to clean it,
3
(The machine must not be used with empty tank!)
4 There is a gauge for recommended
5 Setting/changing delay time. Press and hold PROGRAM button more than 1 second, then release the program
PROGRAM button, set hours by pressing the HOUR button. Then set minutes by pressing the MIN button. Press the
symbol.
6 Setting/changing delay time.
Note: If user don’t press HOUR or MIN button again, the display will go back to
show the current time after 5 seconds, and setting delay time is cancelled.
7 Start the machine
8 If the jug is removed,
9 The Aroma Selector
small number of cups (normally less than 6). Press the AROMA button once for mild strength, twice for medium and
KF7700_Coffe_Maker_ AEG_2019.indd 6 2019-05-07 13:19:33
To Next Page
Loading...
Need help?
General
