AEG L6FBK841B User Manual

1
2
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.
4. Turn the filter 180 degrees in anti-
clockwise direction to open it, without
removing. Let the water flow out.
180˚
5. When the bowl is full of water, turn
the filter back and empty the
container.
6. Repeat the steps 4 and 5 until the
water stops to flow out.
7. Turn the filter anti-clockwise to
remove it.
2
1
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service
Centre.
10. Clean the filter under the water tap.
11. Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
www.aeg.com30

AEG L6FBK841B Specifications

General

Door hinge	Left
Water fill	Cold
Cord length	1.8 m
Control type	Buttons, Rotary
Display type	LED
Door opening	Side opening
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Country of origin	Poland
Inlet hose length	1.3 m
Illumination color	Red
Outlet hose length	1.45 m
Appliance placement	Freestanding
Self-cleaning	-
Drum capacity	8 kg
Maximum spin speed	1400 RPM
Noise level (wash)	75 dB
Number of washing programs	14
Current	13 A
Connected load	1900 W
AC input voltage	230 - 240 V
AC input frequency	50 Hz
Water consumption per cycle	43 L
Package depth	635 mm
Package width	640 mm
Package height	900 mm
Package weight	71000 g
Intrastat code	84501190

Weight and Dimensions

Depth	547 mm
Width	596 mm
Height	847 mm
Weight	69500 g