EasyManuals Logo

AEG L7FC8432BI User Manual

AEG L7FC8432BI
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
If you touch the Start/Pause button,
the appliance performs the only
draining phase.
The appliance empties
the water out
automatically after 18
hours approximately.
6.6 Prewash
With this option you can add a prewash
phase to a washing programme.
The corresponding indicator above the
touch button illuminates.
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
The options can increase the
programme duration.
6.7 Stains
Touch this button to add the stain phase
to a programme.
The corresponding indicator above the
touch button illuminates.
Use this option for laundry with hard
stains to remove.
When you set this option, put the stain
remover into compartment
.
This option increases the
programme duration.
This option is not available
with a temperature lower
than 40 °C.
6.8 Permanent Extra Rinse
With this option you can add a few rinses
according to the selected washing
programme.
Use this option for people with allergies
to detergent residues and with sensitive
skin.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
6.9 Permanent Soft Plus
Set this option to optimise the fabric
softener distribution and improve fabric
softness.
Recommended when you use fabric
softener.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
6.10 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The corresponding indicator above the
touch button illuminates.
The indicator is steady on during
steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows , the indicator goes off
and the indicator
is steady on. The
drum performs smooth movements for
about 30 minutes to keep the steam
benefit. By touching any button the anti-
crease movements stop and the door
unlocks.
A small laundry load helps to
reach better results.
www.aeg.com20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG L7FC8432BI and is the answer not in the manual?

AEG L7FC8432BI Specifications

General IconGeneral
Door colorStainless steel
Door hingeLeft
Cord length1.5 m
Drum volume52 L
Control typeRotary
Loading typeFront-load
Product colorWhite
Built-in displayYes
Custom panel-readyNo
Outlet hose length0.145 m
Appliance placementFreestanding
Dispenser tray type3-way
Drum capacity8 kg
Cycle time (max)295 min
Residual moisture52 %
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)68 dB
Noise level (wash)46 dB
Number of washing programs-
Cycle time (quick washing program)20 min
Current13 A
Connected load2000 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Power consumption (off)0.3 W
Water consumption per cycle47 L
Energy consumption washing per cycle0.82 kWh
Weight and Dimensions IconWeight and Dimensions
Depth554 mm
Width596 mm
Height819 mm

Related product manuals